7
BEFORE OPERATION
SETTING THE CLOCK
1. Choose the clock function.
(12 hour clo ck).
Choose the 2 4 hour
clock.
3. Press the COOKING
MODE button to change
from hours to minutes.
4. Set the minutes. Rotate the
TIMER/ W EIGHT/ POWER
knob until the co rrect minute
is displayed (35).
5. Press the COOKING
MODE button to start
the clock.
2. Set the hours. Rotate the TIM ER/ W EIGHT/
POW ER knob until the co rrect hour is
displayed (23).
x1 and hold for 3 seco nds
x1
x1
x1
Example:
To set the 2 4 hour clock to 23:3 5
There are two setting modes: 1 2 hour clock and 2 4 hour clock.
1.
To set the 1 2 hour clock, hold the COOKING MODE
button do wn for 3
seco nds. will appear in the display.
2. To set the 2 4 hour clock, press the
COOKING MODE
button once more
after Step 1 , in the example below will appear in the display.
x1 and hold
for 3 secs.
To set the clock, follow the example below.
NOTES:
1. Yo u can rotate the TIMER/ W EIGHT/ POWER
knob clockwise o r counter-clo ckwise.
2. Press the STOP butto n if you make a mistake
during programming.
3. If the electrical po wer supply to yo ur microwave
oven is interrupted, the display will intermittently
show after the po wer is reinstated. If
this o ccurs during co oking, the programme will be
erased. The time o f day will also be erased.
4. W hen you want to reset the time o f day, follow the
above example again.
Plug in the o ven.
1. The o ven display will flash:
2. Press the STOP button, the display will show:
3. To set the clock, see below.
4. Heat the oven without foo d. (See page 10, Note 2 ).
Using the STOP button
Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the o ven temporarily during co oking.
3. Cancel a programme during co oking, to uch twice.
To Next Page
Loading...
Need help?
General
