GB-4
SETTING THE CLOCK
Plug in the oven.
1. The oven display will flash:
2. Press the STOP key, the display will show:
3. To set the clock, see below.
4. Heat the oven without food.
(See page GB-7, Note b).
Using the STOP key
Use the STOP key to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
x1
BEFORE OPERATION
3. If the electrical power supply to your microwave
oven is interrupted, the display will intermittently
show "88:88" after the power is reinstated. If this
occurs during cooking, the programme will be
erased. The time of day will also be erased.
4. When you want to reset the time of day, follow the
above example again.
x1
There are two setting modes: 12 hour clock and 24 hour clock.
Step 1.
x1
1. To set the 12 hour clock, press the CLOCK
SETTING key once, as in Step 1 opposite.
2. To set the 24 hour clock, press the CLOCK
SETTING key twice, as in Step 2 opposite.
Step 2.
x2
Example:
To set the 24 hour clock to 23:35:
x2
x2
x1
1. Choose the 24 hour
clock by pressing the
CLOCK SETTING key
twice.
3. Change from hours to minutes
by pressing the CLOCK
SETTING key once.
Check the display.
4. Set the minutes:
Press 10 MIN key three times.
Press 1 MIN key five times.
2. Set the hours:
Press the 10 MIN key twice.
Press the 1 MIN key three times.
5. Start the clock.
NNOOTTEESS::
1. Press the STOP key if you make a mistake during
programming.
2. If the oven is in cooking mode and you wish to
know the time of day, touch the CLOCK SETTING
key. As long as your finger is touching the key, the
time of day will be displayed.
To Next Page
Loading...
Need help?
General
