Sharp R-6R50 - Foreword; Caution Microwave Radiation

R-6G50(B)
R-6R50(W)
R-6R70(W)
R-6R50(B)
R-6R70(B)
R-6R50(W)/(B)
R-6G50(W}/(B)
R-6G62(W)/(B}
R-6R70(W)/(B)
SERVICE MANUAL
ya
f
%
:
iB
(3
SHARP
PRODUCT
DESCRIPTION
GRILL AND MICROWAVE OVEN
R-6R50(W)/(B)/ R-6G50(W)/(B)/ R-6G52(W)/(B)/
, R-6R70(W)/(B) |
FOREWORD
This Manual has been prepared to provide Sharp Corp. Service
Personnel with complete Operation and Service Information for
the SHARP GRILL AND MICROWAVE _ ovens,
R-6R50(W)/(B)/ R-6G50(W)/(B)/ R-6G52(W)/(B)/
R-6R70(W)/(B). =
The Models —_—- R-6R50(W)/(B)/ R-6G50(W)/(B)/
R-6G52(W)/(B)/ R-6R70(W)/(B) are quite similar to Base
Model R-6G10(W)/(B) (Refer No. SS809R6G10EHW).
It is recommended that service personnel carefully study the a
entire text of this manual and Base Model manual, so they will i TOUCH CONTROL PANEL
be qualified to render satisfactory customer service. /! ASSEMBLY
Check interlock switches and door seal carefully. Special at-
tention should be given to avoid electrical shock and microwave
radiation hazard.
COMPONET REPLACEMENT
AND ADJUSTMENT
(RD36102U)
-- CAUTION |
MICROWAVE RADIATION oo
MICROWAVE
Personne! should not be exposed to the microwave energy ‘MEASUREMENT
which may radiate from the magnetron. or other microwave
generating devices if it is improperly used or connected. All
input and output microwave connections, waveguides,flanges |
and gaskets must be secured. Never operate the device without
a microwave energy absorbing load attached. Never look into
an open waveguide or antenna while the device is energized.
WIRING DIAGRAM
Note(Parts List) : The parts marked ”*” are used in voltage
more than 250V. ;
” 7 (nDaez02U) PARTS LIST
€
|
| _ SHARP CORPORATION
in OSAKA, JAPAN