R-g450 MICROWAVE COOKING
To Cook at HIGH
Many foods are cooked at HIGH (100%) for best results. The variabie cooking control allows you to
select the rate of microwave cooking, but the oven will automatically operate at HIGH if no variable
cooking control pad is touched. If you wish to cook at HIGH, it is not necessary to touch the HIGH
pad. For other variable cooking control levels, the desired setting must be entered.
+ Suppose you want to heat 2 cups of coffee for I minute 30 seconds at HIGH.
Procedure
Pad Order
j -____-
1. Enter desired cooking time.
I
1 3 0;
/ p-y
The cooking time will count down to zero. When the timer reaches zero, the indicators will go out and
an audible signal will sound, The time of day will reappear on the display. Microwave energy will stop.
I To Cook by Variable Cooking Control
There are five preset power ieveis.
’
.
Approximate percentage of microwave power for each power level.
HIGH
(Full Power) 100%
MED HIGH
(Roast)
70%
MED
(Simmer)
50%
MED LOW/DEFROST
(Defrost)
30%
LOW
(Warm)
10%
Some foods give best results when cooked more slowiy at a lower cooking power. Your cookbook
indicates the recommended variable setting for each recipe. See your Sharp Carousei microwave cook-
book for guidelines on how to use the variable cooking contra!.
* Supoose you want to heat soup for 2 minutes 15 seconds at MED HIGH.
Procedure
Pad Order
Display /
1. Enter desired cooking time.
2 1 5 :
1 /q
t -
2. Select desired variable cooking
control setting.
M. HIGc:
I
I MEL
tiIGH
1 /
,i l/Z :
t . l-1 I
3. Touch the START pad.
STAFiT
MEC HIGH
2 I II
COOk
The cooking timer will count down to zero.
When the timer reaches zero, all indicators will go out and
an audible signal will sound. The time of day will reappear on the display.
NOTE. If you accidentally touch the wrong variablecooking control pad, immediately touch the
correct pad. The last pad touched will be the setting the oven accepts. For example, if you
touch the MED HIGH pad and then immediately touch the MED pad, the oven will cook at
MED.