Sharp RZ-X700F Series - Page 7

5
LCD Brightness Control
For adjustment of the screens brightness. (increase / decrease)
5
Magnetic Strip Reader (optional)
For reading magnetic stripe cards.
6
Rear/IO Ports view
Serial Port 1, 2, 3, 4
Connects serial devices such as a customer display, a barcode scanner, or a receipt
printer that uses a serial interface.
1
Note:
•
DefaultvoltageatPin9ofCOM2/COM3is5V.Forfurtherinformation,please
contactyourauthorizedSHARPdealer.
2 3 4 1 6 981
10
11
5 7
DC Inlet Jack(AC/DC adaptor)
To supply power to the system, please connect here the supplied AC/DC power adaptor
(12V/7.0A).
2