Sharp SB-29S - REMOVE OF PANEL B-A AND FAUCET ASSY

8
REMOVE OF PANEL B-A AND FAUCET ASS’Y
1. Remove the drain tray ass’y from the panel-B.
2. Remove 2 screws holding the top plate.
3. Separate out the top plate from the unit.
4. Remove 4 screws holding the faucet cover and detach the faucet cover.
5. Remove 2 screws holding the faucet ass’y.
6. Push the push button and insert the jig into the faucet ass’y (Hot water), push up the jig and remove the
lever faucet from the faucet body. Lift up the lever faucet of faucet ass’y (Cool water) to front.
7. Remove 4 screws holding the panel B-A and separate from the unit.
8. Release 2 faucet from the panel-B and remove the panel-A and panel-B from the stand.
9. Remove 2 screws holding the PCB Hot display and PCB Cool display from the panel-B.
10. Remove 2 screws holding the panel-A and panel-B.
11. Now the panel B-A and faucet ass’y are free.
Fig. 5
Fig. 6
Screw
Top plate
Hot water
outlet tube
Cool water
outlet tube
Cord band
Connector pipe
PCB Cool display
PCB Hot display
Screw
Screw
Faucet ass’y (Hot water)
Faucet ass’y (Cool water)
Faucet cover
Faucet mounting plate
Screw
Drain tray ass’y
Panel-A
Lift up
Lever faucet
Panel-B
Faucet body
Faucet ass’y (Hot water)
Faucet ass’y (Cool water)
Panel-B
Screw
Screw
Push
Push up
Jig
Lever faucet
Push button
Faucet body