Sharp SDH3042DB - Specification; Heat Setting Display

E11
COOKTOP FEATURES
SPECIFICATION
SDH3042DB (30 INCH) SDH3652DB (36 INCH)
Product dimension (w x d x h) inch 30" x 21" x 2-5/32" 36" x 21" x 2-5/32"
Cut-out dimension (w x d) inch
Min.: 28-3/4" x 19-21/32"
Max.: 29-5/16" x 20-1/16"
Min.: 34-7/16" x 19-21/32"
Max.: 35-1/32" x 20-1/16"
Voltage (volts) / Amps 240V / 40A 240V / 50A
Frequency ( Hz) 60 60
Total power (Watts) 7400 9600
Cooking Zones 4 5
Left Rear / Boost 1800W / 2600W 7.2" dia. 1800W / 2400W 7.2" dia.
Left Front / Boost 2200W / 3200W 9.2" dia. 1800W / 2400W 7.2" dia.
Right Rear / Boost 2400W / 3700W 10.2" dia. 1800W / 2600W 7.2" dia.
Right Front / Boost 1600W / 2000W 6.2" dia. 2200W / 3200W 9.2" dia.
Center / Boost N/A 2400W / 3700W 11.2" dia.
Simmer Enhancer Enabled Left Front & Right Rear Right Front & Center
HEAT SETTING DISPLAY
DISPLAY DESCRIPTION
-
No power level for the zone
L
Keep Warm function
1 -9
The power level
P
The power boost
H
A cooking zone is still hot to touch (residual heat)
E
Electronics fault error message of specic cooking zone
E0-E9
Error code
0
STOP/GO