3
• Keep your refrigerator out of direct sunlight.
• Do not place next to heat generating appli-
ance.
• Do not place directly on the ground. Provide a
clean, level, firm floor surface such as con-
crete or timber.
When transporting
HINTS WHEN MAKING ICE
1.Do not over fill the Ice cube trays; otherwise the ice cubes
will be joined together when frozen.
2.When the ice cubes are made, turn the lever clockwise
to empty the ice into the Ice cube box.
NOTE:
DEODORIZING UNIT
A built-in unit which requires no manual operation because it automatically starts operating when the
refrigerator is powered on.
To prevent damage to the Ice cube box, do not
make ice in the Ice cube box or pour oil into it.
DEFROSTING
Defrosting is fully automatic due to a unique energy saving system. Whereby the defrost cycle start time
is proportional to the running time of your refrigerator compressor, i. e., the less time the refrigerator
compressor operates (during the winter season or you’re away on holidays), the longer the time between
each defrost cycle.
NOTE:
1.Before transporting, wipe dry any water in
the Evaporating pan located on the rear.
2.Carry the refrigerator by holding the
handles located on the rear and bottom.
3.Connect the power plug to a 230/240 volt.
10 amp. power point.
Ice cube box
Lever
To Next Page
Loading...
Need help?
General
