Sharp SJ-BA31DMXWE-EU

Questions and Answers:

D
Darren MirandaAug 11, 2025
Why does my Sharp SJ-BA31DMXWE-EU Refrigerator display error E09?
- B
  bshepardAug 11, 2025
  Error E09 in your Sharp Refrigerator likely occurs after a long-term power failure. To resolve this: 1. Set the freezer temperature to a colder setting or activate Super Freeze. This should clear the error code once the required temperature is reached. Keep the doors closed to speed up the process. 2. Remove any food that has thawed or defrosted during the error. These items should be used soon. 3. Avoid adding fresh food to the freezer until the correct temperature is reached and the error is resolved. If the issue persists, contact the Sharp help desk.
H
hgallegosAug 21, 2025
What to do if my Sharp Refrigerator displays error E10?
- S
  Shane MyersAug 21, 2025
  Error E10 in your Sharp Refrigerator is likely to occur after a long-term power failure or if hot food has been left in the fridge. To fix this: 1. Set the fridge temperature to a colder value or activate Super Cool. This should remove the error code once the required temperature has been reached. Keep doors closed to improve the time taken to reach the correct temperature. 2. Clear the area in front of the air duct channel holes and avoid placing food close to the sensor. If the problem persists, contact the Sharp help desk.
S
smithjasonAug 31, 2025
What does error E08 mean on my Sharp SJ-BA31DMXWE-EU Refrigerator?
- L
  Laura HayesAug 31, 2025
  Error E08 indicates that the power supply to your Sharp Refrigerator has dropped below 170W. This is not a device failure but a protective measure to prevent damage to the compressor. The voltage needs to be increased back to required levels. If this warning continues, contact the Sharp help desk.