Vegetable crisper (top) • Freezer case (top)
Place the freezer case (small) for freezer case (top)
on top of the freezer case after attaching the case.
67
Removing
Removing
Removing
Mounting
Mounting
Mounting
Removing
Mounting
Shelf
Pull up the front
side and pull out.
Place the back side of the shelf on the rails
and insert by fitting the tabs on the front rails.
Three position adjustable shelf
Press in the
front section,
Pull up to remove.
The front section and the back
section.
Push in the front section
into the back section,
Put in the right and left
tabs as shownm,
Pull the front section.
Tabs
Back section
Front section
Ice case
Pull up to remove.
Insert the case along the
rail and close the door.
Fit on rail
Pull out and pull up
slightly to remove.
Fit the slides into the rails and
insert by holding the front
section slightly up.
Notes
Shelves cannot be removed if
some cases if the doors cannot
be opened fully (more than 90°).
Lubricant (silicone grease) is
applied on the crispers and cases
to facilitate sliding.
Do not wipe it off.
Do not remove accompanying
parts with foods stored.
Accompanying parts become
heavy and injury may occur as a
result of foods and parts dropping.
Do not leave the fridge
compartment doors open for
a long time.
The compartment lamp cover
will become hot.
Do not drop or apply strong
impacts on plastic parts.
They may become cracked.
The slides cannot
be removed.
With the slides stored
To Next Page
Loading...
Need help?
General
