The lamps
are OFF.
Information
displayed in
the beginning
Initial status for the Control panel
46
Front Back
A wooden board
(with relatively
large width)
1
2
Before using your refrigerator
Insert the power plug.
Current: 220 ~ 240V
Cord facing down
Insert securely
Clean the inside parts with a
cloth soaked in warm water.
If soapy water is used, wipe it off
thoroughly.
Notes
The interior compartments of the refrigerator may become hot when
transporting in the case of hot weather.
Before turning on the power, cool the compartments by opening
the doors.
Electronic tones will sound when turning on the power with the doors
open. However, the tones will stop when the doors are closed and
operation will start momentarily.
Loud noise may be noticed at first; however, this is not a malfunction.
The noise will soften as the compartments cool.
Items that are often mistaken as malfunctions
When using for the first time
Right and left doors are not properly aligned.
Adjust using the adjustable feet.
Lower the left side.
When the left door is raised.
When the door opening/closing is heavy.
The door opening/closing may feel heavy when
the refrigerator is tilted backwards.
Insert a wooden board (a relatively wide board),
etc. between the refrigerator rear and the floor
and adjust the tilting.
When the right door is raised.
(Until the adjustable foot on the
other side is slightly off-ground.)
Lower the right side.
ME
DEODORIZER
To Next Page
Loading...
Need help?
General
