Insert the tabs (right and left) on the
foot cover into the holes (right and left)
on the main unit. Insufficient attachment
may lead to abnormal noises.
Tab
Hole
Hole
Foot cover
Remove the dust inside the
foot cover as well.
Absorb dust with a vacuum
cleaner.
Attach the foot cover at last.
Foot cover
1
(Clean once a year)
1
2
2
3
69
Notes
When using chemical rags, be sure to follow the accompanied
directions.
About the stainless tray
Salt adhered on the tray may cause rusting. In this case, clean the tray
with kitchen detergent (cream-type cleanser, etc.) as quickly as possible.
Do not use nylon scrubbing brushes. The tray may become scratched.
Do not use polishing powder, benzine, hot
water etc.
If undiluted detergent is used or soapy water is not wiped
off thoroughly, cracking of plastic parts can result.
Wipe any food oils adhered to plastic components
as they can cause cracking of the plastic surface.
There may be build-up of dust from convection of air.
Back of refrigerator, floor and walls
Turn the right and left adjustable feet until they
are off-ground and move the refrigerator.
Wipe off dirt.
Wipe off dust
from the power
plug as well.
Pull out and remove the
foot cover.
Dust and soil
Remove dust from the holes
on the lower section of the
back side using a vacuum cleaner.
Adjustable feet
Transportation wheels
(Front, back, left and right)
To Next Page
Loading...
Need help?
General
