Sharp SJ-P65M-SLG - Page 21

21
SJ-D59M/P60M
SJ-D64M/P65M
SJ-D69M/P70M
(3) Setting of Fan motor ass'y , Defrost thermo. ass'y and Fuse ass'y
After inserting, fix with vinyl tape.
60mm
Vinyl tap
e
(4) Inserting of pins
Aluminum
tape
Aluminum
tape
Turn up is lead wire
ATTENTION
cut
10 5mm
+
Tapping screw
Tapping
screw
E.V cover
E.V cover
sealer C
E
E
L-band C
L-band C
Defrost
thermo. ass
’y
Defrost
thermo. ass’y
Set metal side below
F
F
Fuse ass’y
E.V
cover
Fuse
ass’y
Lead E.V-
cover ass’y
Sec. F-F
Sec. E-E
Not come out of claw
Take out lead wire from
square hole to front, and
seal with E.V cover sealer C.
[FRONT SIDE]
more than
3.5mm
more than
3.5mm
Figure A-17
Figure A-19
123
456
789
F-thermostat 3
F-thermostat 4
Fuse 8
Fuse 7
Fan motor 1 , 2
Fan motor 9
(RED, inserted
)
(BROWN, inserted)
(WHITE)
Defrost thermo. 5
Defrost thermo. 6
(PINK)
(BLUE)
(BLACK)
WIRE COLOR FOR FAN MOTOR
100-110V : WHITE
127V : YELLOW
220-240V : BLUE
Note Pins should be inserted surel
y,
and check by pulling it.
Figure A-18