Sharp SJ-PT56R-HS - Page 28

SJPT56RHS
9 – 4
15)Fix R LED PWB L ass'y to R-c box cover with tapping screw.
16)Insert the R-pl harness to 15) ass'y, and fix it to R-c box cover with paper tape.
17)Fix R-thermistor to R-c box cover,and stick R-thermistor sealer.
18)Stick Mask label to 17) ass'y.
19)Insert 14) ass'y to 18) ass'y.
20)Fix Lamp cover to 19) ass'y.
Figure A-11
Figure A-12
R-PLharness
Damper Harness
Plasma holder
Plasma holder
Plasma holder
R-PLharness
Connect IONIZER-K and connectorof R-PL harness
Connect should be inserted surely.
Figure A-9
Stick A-sealer rc-d to Damper ass'y
Insert Damper Harness to Damper ass'y
A-sealer RC-d
Damper ass'y
A-sealer RC-d
Figure A-10
R-C BOX-E
Mask Label
Tapping screw
R-PL Harness
R-Thermistor
R-Thermistor
Sealer
R-C Box Cover
R Led Lamp Pwb L Ass'y
R-C Box Cover
R-Thermistor
R Air guider b
R Air guider a
R Led Lamp Pwb L Ass'y
Paper tape
(30x60mm)