Sharp SJ-WS320TS - Page 33

SJ-WS320T-S
33
3. Assembling procedures of R control cov. ass’y
1. Stick A-sealer rc-d to Damper ass’y.
2. Insert R-c box herness to Damper ass’y.
3. Insert R-c box harness to Plasmacluster unit.
Insert Plasmacluster unit to R air guider a.
4.FitDamperass’ytoRairguideraandxRairguiderb.
5. Fix 4) ass’y with Paper tape.
6. Stick A-sealer damper to 5) ass’y.
7. Stick Ra sealer a to 5) ass’y.
Ra sealer a
R air guider b
R air guider a
Plasmacluster unit
R-c box cover
A-sealer rc-d
Damper ass’y
A-sealer damper
A-sealer rc-d
R-c box harness
Damper ass’y
?S?o
?W?o
R air guider a
Plasmacluster unit
Damper ass’y
Ra sealer a
Ra sealer a
Ra sealer a
R air guider b
R air guider a
Damper ass’y
Damper ass’y
A-sealer damper
A-sealer damper
Paper tape Paper tape
Paper tape
>PS<
A216
Paper tape
>PS<
A217
(W30×280mm)
OVER LAP
25~30
(W30×70mm)
(W30×220mm)
(W30×70mm)