Sharp TL-M5200 - Page 37

-37
Multi Screen Projection
4 Turn on all of the monitors.
5 Access the monitor 1 from the com-
puter via Internet Explorer.
(See “Controlling the Monitor Using Internet
Explorer (Version 5.0 or later)” on page 16 for
the details.)
6 Click “Master & Slave” on the menu.
7 Select “Master” on “ Master & Slave
Setting”.
• “Slave Address” display will appear.
8 Make the IP address for each moni-
tor as shown below.
• Slave 1 : 192.168.150.4
• Slave 2 : 192.168.150.5
• Slave 3 : 192.168.150.6
9 Click the “Apply” button.
10 Access the monitor 2 from the com-
puter via Internet Explorer.
(See “Controlling the Monitor Using Internet
Explorer (Version 5.0 or later)” on page 16 for
the details.)
11 Click “Master & Slave” on the menu.
12 Select “Slave” on “Mater & Slave
Setting”.