Sharp TOUCH DISPLAY - Touch Panel Settings; Configuring settings from the menu bar; Configuring settings from System Preferences

5
E
Touch Panel Settings
The touch displaydriverstartsautomaticallyandtheicon( )appearsonthemenubar.
TIPS
• IfPN-K322B(orPN-K322BH)andLL-S201Aareconnectedatthesametime,ascreenforselectingthemodelwillappear
each time you select a setting.
• Dependingontheconnectedmodel,thescreenimageisdifferent.
Howtoconguresettings
n
Conguringsettingsfromthemenubar
1. Click the touch display driver icon ( ) on the menu bar.
2. Click a menu to change a setting.
• CurrentScreenResolution:Themodelcurrentlybeingusedandthecurrentscreenresolutionappear.
• Calibration:Seepage7.
• Properties:Seepage8.
• HardwareInformation:Selectthistospecify“RotateMode”.
-RotateMode:
Tocorrectthetouchpositionwhenthescreenisrotated,selectthescreenanglefromthefollowing:
Standard(0°)/90°/180°/270°
• VersionInformation:Showstheversionofthetouchdisplaydriver.
• DisableTDDriver:
Selecttodisablethetouchpanelfunction.
Todisableasingletouchpanelfunction,see“FunctionSetting”.(Seepage9.)
n
ConguringsettingsfromSystemPreferences
1. Click “System Preferences” from the Apple menu ( ).
2. Click “SharpTouchDisplay”.
3. Click the menu and select settings.
Menu
TIPS
• Ifthe“ShowSettingUtilityinmenubar”checkmarkisremoved,thetouchdisplaydrivericon( )doesnotappearonthe
menu bar.