n
Right-click
You can set press and hold to be recognized as a right click.*
Enable press and hold for right-clicking
When the checkbox is selected, press and hold is recognized as a right click.
Press and Hold Duration
Set the time until press and hold is recognized as a right click (“Short” (0.5 sec) to “Long” (1.5 sec)).
* If the Mac OS left-click long press action interferes with the press and hold action, do the following:
• Use “Click or tap with two ngers”
• Adjust “Press and Hold Duration” to a longer setting (toward “Long”)
n
Function Setting
Select the touch action to be used. (See page 11.)
Touch actions that are followed with a
mark have multiple actions that can be used. Click a touch action and selected the
desired action.
Caution
• Touch actions that can be used vary depending on the OS.
* OS X v10.8 only
Touch Panel Settings
OS X v10.8/v10.7 OS X v10.6
*
To Next Page
Loading...