Sharp VC-MH321HM - Page 26

ADVANCED OPERATION
SEARCHING THE VIDEO TAPE
SKIP SEARCHING THE VIDEO TAPE
You can search the tape in 30 second time intervals. To do this follow the procedure below:
1.Press PLAY/X2 (> ) to start the video tape playing.
2.Press SKIP SEARCHING on the remote 1 press = 30 seconds.
control. The number of times you press 2 presses = 1 minute.
SKIP SEARCHING determines the 3 presses = 1 minute 30 seconds.
forward search time. 4 presses = 2 minutes.
@ After searching, normal playback will
resume automatically.
22