Sharp VC-MH321HM - Page 27

ADVANCED OPERATION
SEARCHING THE VIDEO TAPE
DIGITAL PROGRAMME SEARCH SYSTEM (DPSS)
Your VCR records a marker signal on the tape at the start of each recording. These signals
can be used later to locate the starting point of a recording.
Press DPSS € / B® to locate a previous programme or the next programme.
For exampie,
1. Load the video tape into the VCR
2.Press DPSS ® three times. A 3 will appear on the on-screen display, and the VCR will
fast forward to locate the third recording after the current one.
3.Press DPSS €@ once. A -1 will appear on the on-screen display and the VCR will rewind
to locate the beginning of the current recording.
Rewind DPSS Signals Fast Forward
DPSS
number
Current tape position
4.To cance! the search before it has finished, press STOP (Ml ) or PLAY/X2 (P ).
23