Sharp VC-MH321HM - Page 6

BEFORE USING YOUR VCR
IMPORTANT NOTES ON YOUR VCR
IDEAL VCR LOCATION
PLACE THE VCR..
@ ..on a flat level surface away from
radiators or other heat sources and out of
direct sunlight.
@ ..and video tapes away from magnetic
sources such as speakers or microwave
ovens.
@ ..at least 8” (20cm) away from the TV.
® ..away from curtains, carpets or other
materials and allow ventilation space
around the VCR.
DO NOT..
@ ..block the air-vent openings.
@ ..expose the VCR to excessive dust,
mechanical vibration or shock.
@ ..place any heavy object or liquid on top
of the VCR. If liquid drops inside the VCR
unplug immediately and contact your
SHARP dealer. Do not use the VCR.
@ ..insert or drop anything into the tape
compartment or through the
air-vents, as this could result in serious
damage, fire or an electric shock.
POWER SOCKETS
@ To avoid overheating or even fire, insert
the plug correctly into the socket
DO NOT..
@ ..overload power sockets, this may cause
a fire or electric shock.
@ ..pull the power cord to disconnect the
plug from the mains.
@ ..bind the power cords together.
@ This VCR is not equipped with a mains power switch. Accordingly, nominal current to
drive the clock is drawn at all times when the AC power cord is plugged into a wall
socket. If the VCR is not to be used for an extended period be sure to unplug the cord.