Sharp VC-MH321HM - Page 7

BEFORE USING YOUR VCR
UNPACKING THE ACCESSORIES
(TYPE AA/R6/UMS3)
BATTERIES (X2)
for the remote contro}!
unit.
7 RF CONNECTION CABLE
connects the VCR to the TV.
To fit the batteries into the remote
control
Remove the battery cover on the back of
the remote control.
Fit the batteries: OtoO and @to®
terminals. Place the battery cover back
Battery
cover
into
position.
Remote Control
@ Remote Controi must be pointed towards the VCR to operate.
@ Do not expose to liquid or shock.
@ May not function if the VCR is in direct suntight or any other strong light.
@ Replace both alkaline batteries (type AA/R6/UM3) if the remote control
fails.
@ Remove the batteries and keep in a safe place if you do not plan to use the
VCR for several months.
@ Remove and dispose of flat batteries safely and promptly.
®@ Incorrect use of batteries may cause them to leak or burst.
s