8
SHARP Helpline tel: 08705-274277
or www.sharp.co.uk/support
INSTALLING YOUR VCR
The clock setting screen will now appear.
To set the time and date follow the steps
below:
1.
Press the [ / ] menu select
buttons to select either 12 or 24 hour
clock operation.
2.
Press [
/
] to select TIME. Enter
the time using the
NUMBER
BUTTONS or the [ / ]
buttons. If the minutes or hours are
less than 10, enter the leading 0. If
using the 12 hour clock enter AM or
PM by pressing the
AM/PM
button on the remote control.
3. Press [ / ] to select DATE. Enter
the date using the
NUMBER
BUTTONS or the [ / ]
buttons. For example, for 1st April
enter
01 04.
4. Press [ / ] to select YEAR. Enter
the last two digits of the year using
the
NUMBER BUTTONS or the
[ / ] buttons. For example, for
2001 enter
01. For the year 2002
enter
02.
5. Press the SET button to store the time
and date.
NOTE:
✔
All the programmes should now be correctly tuned in and the clock set.
• You will need to update the clock for Winter/Summer daylight saving.
12 hour example:
24 hour example:
CLOCK
MODE T I ME DAT E YEAR
24H 15:0501/0401
MODE : 24H / 12H
: SELECT : CHANGE
SET : ENTER MENU : EX I T
CLOCK
MODE T I ME DAT E YEAR
12H 03:05PM 01/04 01
MODE : 24H / 12H
: SELECT : CHANGE
SET : ENTER MENU : EX I T
AM/PM
TINS-3992UMZZ English.book Page 8 Wednesday, May 9, 2001 12:25 PM
To Next Page
Loading...
