EasyManua.ls Logo

Sharp VC-MH75HM - Page 42

Sharp VC-MH75HM
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
VC-MH75HM
No picture E-E signal. (by pass)
Is picture signal input into the pins(31) and (32) of IC201?
YES
YES
YES
YES
NO
NO
NO
NO
NO
Check the line between pin(24) of TU101 and pin(31) of IC201.
Check the line between external video input terminal (J201) and
pin(31) of IC201.
Check the line betweem video input terminal and pin(28) of IC201.
Is picture signal outputted to the pin(52) of IC201?
Check the line between pins(63) and (62) of IC201
and all the way up thru to pins(84) and (85) of IC701.
Is picture signal output to the emitter of video output buffer
(Q251)?
1 Line output: Check video output buffer(Q251) peripheral and output terminal periphery.
2 RF output: Check video output buffer(Q251) peripheral and video input terminal of RF converter periphery.
Is supply voltage of 5V(Y-Vcc) fed to the pin(12) of IC201?
Check the PC 5V line.
Is there Y/C serial data and Y/C signal clock applied
to the pins(63) and (62) of IC201?
Check peripheral circuit of Q251.
FLOW CHART NO.19 E-E MODE TROUBLESHOOTING

Other manuals for Sharp VC-MH75HM

Related product manuals