Sharp VC-MH80

vc-ma0
VC-MH90
2. DISASSEMBLY AND REASSEMBLY
2-1 DISASSEMBLY OF MAJOR BLOCKS
TOP CABINET
: Remove 4 screws 0.
OPERATION PWB
: Disconnect the FFC from the
BOlTOM PLATE
: Remove 5 screws 8 and 2
screws 0.
socket 0. Remove 2 clips do, .
OSD/MPX PWB
: Disconnect the FFCs from the 3
FRONT PANEL : Remove 7 clips @.
TIMER PWB
: Remove 1 screw 8. Disconnect
sockets 0. Take out 3 holders
the FFC ,from the sockets @
0.:
and @ . Remove 3 clips @.
TOP CABINET