Sharp VC-MH80

VC-M H80
VC-MH90
MECHANISM/
MAIN PWB
ASSEMBLY
: Remove 2 screws
@,2 screws
@and 2 screws @ .Remove 2
screws @from below the main
frame. Take out the socket, @
Remove 2 screws @ and take
out the tuner holder. Rempve
1 screw @I.
Lift the antenna terminal block
and take the mechamism/main
PWB assembly out of the main
frame. Be careful not to hit the
REC TIP switch located below
the cassette controller.
TIfhER PWB
&XM+APXPWB