EasyManua.ls Logo

Sharp ViewCam VL-AH151S

Sharp ViewCam VL-AH151S
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VL-AH151S-GB/pp. 045-054; 01/11/6/18:00
G. K. Associates, Tokyo
Advanced Features
Advanced Features
53
Digital Dual Picture
This function allows you to record two images
on one screen using one of two modes,
Picture-in-Picture or Title Screen.
Note:
The functions below cannot be used together
with Digital Dual Picture:
—STRETCH and SLIM EFF. picture effects
—Strobe
—Digital Image Stabilization (DIS)
—Wide screen (16:9)
—Digital Zoom and Digital Quick Zoom
Selecting Digital Dual Picture
1 In Recording Standby mode, press the
MENU button until
(MENU 1)
appears.
2 Press the or button (Q) to select
DUAL/SNAP, then press the SET (B)
button (W) to select DUAL.
3 Press the DISPLAY button to turn off the
menu screen.
Picture-in-Picture
You can simultaneously record a normal image
with a smaller close-up image of the subject
inset within the normal image. This is useful, for
example, when you want to capture the facial
expression of a musician while recording a
concert.
1 In Recording Standby mode, press the
DUAL/SNAP button.
An inset image of the scene appears.
2 Push the Power Zoom control to frame
the inset subject.
3 Press the REC START/STOP button to
begin recording.
To change the position of the inset image
Press the (or ) button. The inset image
moves as shown below.
STLSTL
STLSTL
STLSTL
To freeze the inset image
Press the STL (B) button in step 2 above. The
inset image freezes. The Power Zoom control
can now be used to adjust the size of normal
image. To cancel, press the STL button again.
Note:
Pressing the (or ) button while the inset
image is frozen cancels the still image.
To return to normal picture
Press the DUAL/SNAP button.
SET
MENU
DUAL / SNAP
DIS OFF
DGTL ZOOM OFF
EXTEND 2X
DUAL
1
STLSTL

Table of Contents

Related product manuals