EasyManua.ls Logo

Sharp VIEWCAM VL-A110U

Sharp VIEWCAM VL-A110U
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
VL-A110U/hyou; 00/12/14/18:00
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
Osaka, Japan
Printed in Malaysia
TINSE0397TAZZ
01P02-M-G
LIQUID CRYSTAL DISPLAY CAMCORDER
OPERATION MANUAL
Important
Model No.:
Serial No.:
Please read this operation manual
carefully before using the VIEWCAM.
For assistance in reporting the theft or
loss of
this product, record on the line
below the
model number and serial number which
are located on the bottom of the unit.
Please retain this information.
See page 54 for use of Demo mode.
Model Specific Section
Your Product Model
Number & Description:
Warranty Period for this Product:
Additional Item(s) Excluded
from Warranty Coverage (if any):
Where to Obtain Service:
What to do to Obtain Service:
VL-A110U Camcorder
(Be sure to have this information available when you need service
for your Product.)
One (1) year parts and ninety (90) days labor from date of pur-
chase except for the rechargeable battery incorporated in this Prod-
uct which is warranted for thirty (30) days from date of purchase.
Non-rechargeable batteries.
From a Sharp Authorized Servicer located in the United States. To
find the location of the nearest Sharp Authorized Servicer, call Sharp
toll free at 1-800-BE-SHARP.
Ship prepaid or carry in your Product to a Sharp Authorized Servicer.
Be sure to have Proof of Purchase available. If you ship the Prod-
uct, be sure it is insured and packaged securely.
Valid for warranty service in the U.S. only
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand
product (the “Product”), when shipped in its original container, will be free from defective workmanship
and materials, and agrees that it will, at its option, either repair the defect or replace the defective
Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts
or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded
item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which
has been subjected to improper voltage or other misuse, abnormal service or handling, or which has
been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth
below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to
purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH
BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above
limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other
than those described herein, or to extend the duration of any warranties beyond the time period
described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall
be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and
for the period of time described herein, shall constitute complete fulfillment of all liabilities and
responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full
satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event
shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were
caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor
shall Sharp be liable or in any way responsible for any incidental or consequential economic or property
damage. Some states do not allow the exclusion of incidental or consequential damages, so the above
exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE.
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, GO TO OUR WEBSITE AT www.sharp-usa.com
OR CALL 1-800-BE-SHARP
References
Preparation
Basic Operations
Playback
Useful Features
Operation Summary
Basic Operations
Camera Recording
Advanced Features
NTSC
MODEL
VL
-
A110U

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Sharp VIEWCAM VL-A110U and is the answer not in the manual?

Sharp VIEWCAM VL-A110U Specifications

General IconGeneral
Recording MediaVHS-C
FocusAuto/Manual
Image SensorCCD
ViewfinderColor
LCD Screen2.5 inches

Summary

Important Information for Consumers in the U.S.

Safety Warnings

Crucial safety advice regarding fire, electric shock, and product handling.

Product and Battery Disposal

Guidance on environmentally responsible disposal of the product and its battery.

IMPORTANT SAFEGUARDS

General Safety Instructions

Comprehensive safety guidelines for operating and maintaining the equipment.

Environmental and Usage Precautions

Advice on avoiding hazardous locations and ensuring proper ventilation and power usage.

Precautions

Handling and Environmental Care

Tips on protecting the VIEWCAM from sun, magnetic sources, moisture, and extreme temperatures.

Operational Cautions

Advice on avoiding direct sunlight, dark environments, and using appropriate accessories.

Supplied Accessories

Optional Accessories

Operation Summary

Part Names

Identifies and describes the various physical components of the VIEWCAM.

Quick Reference Index

Provides a quick guide to common operational tasks and their corresponding page numbers.

Warning Indicators

Explains the meaning of various warning symbols and messages displayed by the VIEWCAM.

Preparation

Battery Pack Operations

Covers inserting, removing, and charging the main battery pack for the VIEWCAM.

Powering and Cassette Handling

Instructions for powering via AC adapter and inserting/removing video cassettes.

System Settings

Covers installing the memory battery and selecting the on-screen display language.

Basic Operations

Camera Recording

Essential steps for recording video using the VIEWCAM in full auto mode.

Zooming and Recording Aids

Explains zoom, recording time display, and battery power indication.

Playback Functions

Covers playback, volume control, watching on TV, video search, and still image playback.

Useful Features

Controls, Menus, and Basic Settings

Navigating controls, menus, and adjusting basic settings like date and time.

Recording Enhancements

Features like fade effects, quick review, and edit search for better recording quality.

Special Recording Modes

Covers wide screen, macro shots, self-recording, and digital picture effects.

Remote Control and Feature Settings

Using the remote control and setting up features like counter memory and program search.

Advanced Features

Digital Picture Effects and Scene Modes

Applying filters like B/W, Sepia, and Negative, and selecting scene modes.

Titles, Focus, and Exposure Control

Superimposing titles, changing preset titles, and adjusting focus and exposure.

White Balance and Picture Adjustments

Locking white balance and adjusting picture/backlight settings.

Video Editing and Playback

Guides on video editing and gamma playback features.

References

Useful Information

Hints for better shooting, lighting advice, and dew formation information.

Troubleshooting and Specifications

Table for before requesting service and detailed technical specifications.

Related product manuals