VL-A110U/pp. 021-023; 00/11/21/18:00
G. K. Associates, Tokyo
23
Still
The still function makes it possible to pause
playback.
During playback, press the STILL button ( ).
To return to normal playback, press the
STILL button again or press the PLAY
button (D).
Notes:
• The sound is off during Still mode.
• To protect the tape, the VIEWCAM automatically
returns to normal playback if it is left in Still mode
for more than 5 minutes.
• If the still function is used when connected to a
TV, noise will appear and distort the playback
image.
REW PLAY STOP STI LLFF
Video Search
The video search function makes it easy to
search for a desired scene on the tape.
Searching for a Scene Near the Current
Tape Position
1 During playback, press the Forward
Search (B) (or Reverse Search [C])
button.
• The playback picture fast forwards (or
reverses).
2 When you find the desired scene, press
the PLAY button (D) to return to normal
playback.
Searching for a Scene Far from the
Current Tape Position
1 During fast forward (or rewind), press
and hold down the Forward Search (B)
(or Reverse Search [C]) button.
• The fast forward (or reverse) playback
picture is displayed.
2 If the desired scene is still rather far
from the current tape position, release
the button to return to normal fast
forward (or rewind).
3 Repeat steps 1 and 2 above until you
find the desired scene.
4 Press the STOP button (A) and then
the PLAY button (D) to begin normal
playback.
Notes:
• The sound is off during search.
• Some picture noise appears during search. This
is not a malfunction.
Forward Search button
Reverse Search button
REW PLAY STOP STI LLFF
Basic Operations
Playback
Basic Operations
Playback
To Next Page
Loading...
