87
Digital Still Camera Features
3 Click the “USB driver” button.
• Welcome screen appears.
4 Click the “Next” button.
• Information screen appears
5 Click the “Next” button.
• Installation begins.
6 Confirm the message on the screen, and then click the “Finish” button to complete
the installation.
Note:
• If your computer gives you the option to restart, you may do so.
7 Insert a card that contains recorded still images into camcorder.
8 Connect the camcorder to the PC with the supplied USB cable as shown below.
• It is recommended to use the AC adapter as a power source for extended periods of
use.
To USB terminal
To USB terminal
USB cable (supplied)
9 Set the Media Selection switch to u.
10
Hold down the Lock button and set the Power switch to w.
• PC will recognize the camcorder automatically.
To Next Page
Loading...
