Sharp Viewcam VL-Z7U

14
Preparation
Preparation
4 Press m or l to select “EXECUTE”,
then press the center of the Operation
button.
5 Press the center of the Operation
button.
6 Press m or l to select “JUN”
(month), then press the center of the
Operation button.
7 Press m or l to select “2” (day),
then press the center of the Operation
button.
8 Press m or l to select “2004” (year),
then press the center of the Operation
button.
9 Press m or l to select “10 AM”
(hour), then press the center of the
Operation button.
Setting the Date and
Time
Available modes:
Tape Camera, Card Camera
Example: Setting the date to June 2, 2004
(JUN. 2. 2004) and the time to 10:30 am
(10:30 AM).
Note:
• Before performing the steps below, make
sure that the CR1216 type lithium battery has
been installed (see page 12).
• The example screens shown are for Tape
Camera mode.
1 Hold down the Lock
button and set the
Power switch to v.
2 Press the DISPLAY button until the
mode screen appears.
3 Press l or m on the Operation
button to select “MENU”, then press
the center of the Operation button.
BLC GAIN/ OFF
FADE
M ENU
SCENE
M ENU
EXECUTE
FADE
M ENU
SCENE M ENU
BLC GAIN/
OTHERS 2
RETURN
T IME CODE OFF
OFFTC OUT
SETTING
12H
12H
24H/
JAN. 1 20
12 00AM:
03.
JUN.
12 00AM
:
1 2003.
SETT ING
JUN.
12 00AM
:
2 2003.
SETT ING
JUN.
12 00AM
:
2 2004.
SETT ING
JUN.
10 00AM
:
2 2004.
SETT ING
Operation button
Power switch
DISPLAY button
Lock button