Sharp VT-G14 - Page 12

12
VT-G14
VT-G21
Initial settings of EEPROM data
Initial settings of adjustment items
Item Variable range Initial setting
R CUT OFF 0 ~ 255 0
G CUT OFF 0 ~ 255 0
B CUT OFF 0 ~ 255 0
V-AMPLITUDE 50Hz 0 ~ 127 35
V-AMPLITUDE 60Hz 0 ~ 127 37
V-LINEARITY 50Hz 0 ~ 31 25
V-LINEARITY 60Hz 0 ~ 31 18
V-OUT PHASE 50Hz 0 ~ 7 06
V-OUT PHASE 60Hz 0 ~ 7 03
HORIZONTAL POSITION 50Hz 0 ~ 31 08
HORIZONTAL POSITION 60HZ 0 ~ 31 12
Y-SUB CONTRAST 0 ~ 31 0
SUB-COLOUR 0 ~ 240 91
SUB-BRIGHT 0 ~ 150 100
G-DRIVE GAIN 0 ~ 255 128
B-DRIVE GAIN 0 ~ 255 128
SUB-TINT 0 ~ 37 18
BELL FO 0 ~ 3 01
R-Y BLACK OFFSET 0 ~ 15 8
B-Y BLACK OFFSET 0 ~ 15 8
PICTURE Adjust User setting
Initial setting : NORMAL (CONTRAST at MAX, others at CENTER)
Trouble indicators
If the set is interrupted by the protectors, the following indicators work to identify a spot in trouble.
1)
LED (red) flashing : Deflection system protector activated (high-voltage or beam protector)
2) REC LED flashing : I
2
C bus line error (VCJ or tuner, EEPROM)
3) LED off : Power protector activated (+B line short-circuited)
Model
number
In-house
product code
Sound
system
On-screen
display
language
Geomagnetism adjustment
V
H
Background
y
x
45,000nT(0.45G)Russian
D/K
A3HEG14VJVT-G14
20,000nT(0.20G)
7,500°K 0.300 0.310
VT-G21
A3HEG21VJ
D/K
Russian
45,000nT(0.45G)
20,000nT(0.20G) 7500K 0.300 0.310
Factory settings