EasyManua.ls Logo

Sharp WF-1000W

Sharp WF-1000W
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WF-1000W
– 2 –
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
QACCE0007AW00
AC POWER SUPPLY CORD AND AC PLUG ADAPTOR
QACCA0001SJ00
QPLGA0253AFZZ
VOLTAGE SELECTION
Before operating the unit on mains, check the preset voltage. If the voltage is different from your local voltage, adjust the voltage
as follows: Slide the AC power supply socket to the visible indication of the side of your local voltage.
SPECIFICATIONS
General
Power source: AC 110-127 V/220-240 V,
50/60 Hz
DC 15 V ["D" size
(UM/SUM-1, R20 or HP-2)
battery × 10]
Power
consumption: 28 W
Output power: PMPO; 200 W (total)
(AC operation)
MPO; 50 W (25 W + 25 W)
(AC operation, 10 % T.H.D.)
RMS; 25 W (12.5 W + 12.5
W)
(DC operation, 10 % T.H.D.)
Input terminal: Mixing microphone;
600 ohms
CD/LINE; 350 mV/47 kohms
Output terminal: Headphones; 16-50 ohms
(recommended; 32 ohms)
Dimensions: Width; 300 mm (11-13/16")
Height; 240 mm (9-1/2")
Depth; 220 mm (8-11/16")
Weight: 3.8 kg (8.4 lbs.) without bat-
teries
Radio section
Frequency range: FM; 88 - 108 MHz
SW1; 2.3 - 7.3 MHz
SW2; 7.3 - 22 MHz
MW; 526.5 - 1,606.5 kHz
Tape recorder section
Frequency response: 60 - 12,000 Hz (Normal tape)
Signal/noise ratio: 40 dB (TAPE 1, recording/playback)
55 dB (TAPE 2, playback)
Wow and flutter: 0.15 % (WRMS)
Motor: DC 9 V electric governor
Bias system: AC bias
Erase system: Magnet erase
Speaker section
Type: 2-way type
Speakers: 12 cm (4-3/4") free-edge speaker × 2
Tweeter × 2
Impedance: 8 ohms
Dimensions: Width; 235 mm (9-1/4")
Height; 262 mm (10-5/16")
Depth; 220 mm (8-11/16")
Wei
g
ht: 1.8 k
g
(
4.0 lbs.
)
/each
Specifications for this model are subject to change without
prior notice.

Related product manuals