Do you have a question about the Sharp WF-930Z(BK) and is the answer not in the manual?
Power source | DC 6V (4 x UM-3 (AA) batteries) / AC adapter (AD-6) |
---|---|
Accessories | AC power cord |
Frequency range (MW) | 530 - 1600kHz |
Frequency range (SW2) | 9 - 22MHz |
Output | Headphone jack |
Power source, consumption, output, input/output terminals, dimensions, and weight.
Frequency ranges, response, signal/noise, wow/flutter for radio and tape sections.
Details on speaker type, size, input power, and impedance.
Detailed steps for removing the front cabinet, main PWB, graphic equalizer, LED PWB, tape mechanism, and power PWB.
Steps for removing the front panel and woofer from the speaker assembly.
Procedures for removing tape mechanism, heads, pinch roller, motor, and belts.
Steps to remove record/playback, playback, and erase heads with adjustment notes.
Guide for removing/reinstalling pinch roller, motor, and belts.
Adjustments for tape mechanism, torque, speed, azimuth, and tuner sections.
Tape section controls, bias oscillation, and playback amplifier sensitivity checks.
Details on how to interpret part codes for capacitors and resistors.
Part numbers and descriptions for ICs, transistors, and diodes.
Part numbers and descriptions for filters, transformers, coils, and capacitors.
Part numbers and descriptions for resistors and miscellaneous circuitry components.
Part numbers for mechanical, cabinet, and accessory items.
Part numbers for accessories, packing materials, and main PWB assemblies.