14
REMOVE OF VOLUME SW. ASS’Y
Screw
Back cover
L-Wire volume SW.
Volume SW. support-E
Volume SW. ass’y
Nut
Fig. 28
Note : For disassembly
Pull the lead wire from PCB-A.
Fig. 29
Volume SW.
Blue lead wire
Orange lead wire
White lead wire
Green lead wire
PCB-B
L-Wire for PCB-A CN2
1. Remove the body in accordance with “REMOVE OF BODY”.
2. Detach the lead wire for PCB-A CN2 from the PCB-B
3. Pry the claws of volume SW. support-E and remove the PCB-B
4. Remove the nut holding the volume SW. angle with the volume SW. support-E.
5. Remove 2 screws holding volume SW. support-E with the back cover.
6. Pull out the lead wire from the PCB-A
7. Now the volume SW. ass’y is free.
Volume SW. angle
To Next Page
Loading...
