Sharp WQ-CH800H User Manual

States that the apparatus complies with the requirements of EN 55014, 02.1987.

Warns against exposing the appliance to dripping or splashing to prevent fire or shock hazards.

Discusses copyright implications for audiovisual material and advises consulting national laws.

Warns about the low-power laser device and advises against removing covers or touching internal components.

Explains that mains voltage remains present inside the unit when the FUNCTION switch is set to POWER STAND-BY.

Warns of dangerous internal voltages and stresses unplugging the unit before any service or prolonged non-use.

Declares that the equipment complies with specific radio-electric disturbance regulations.

Details the included AC power lead for the unit.

Advises against solvents, specifies operating temperature limits, and recommends keeping away from direct sunlight.

Warns about internal voltages, proper AC plug handling, and advises professional servicing for internal issues.

Addresses condensation issues and warns about the laser pickup in CD players and potential eye damage.

Identifies and describes the function of various buttons and indicators on the front panel.

Details the aerial, headphone socket, and AC power input connection points on the rear.

Identifies the CD and cassette compartments and their respective eject buttons.

Instructions for connecting the unit to AC power via the input socket and mains.

Guides on inserting and removing "D" size batteries for battery operation.

Provides guidelines for battery use, including insertion, removal, and mixing of battery types.

Advises on handling and cleaning compact discs to prevent damage and ensure proper playback.

Step-by-step instructions for loading up to 5 discs into the CD changer mechanism.

Explains how to select a disc and start playback, including volume and equalizer adjustments.

Details how to pause/resume playback and how to stop the CD playback process.

Instructions on how to switch the unit to standby mode after use.

Warns about low battery power affecting disc holder movement and the need for a level surface.

Describes how to select a specific disc from the changer for playback, while stopped or during playback.

Explains how to select and play any specific track from any disc in the changer.

Explains how APSS automatically locates the beginning of tracks for searching.

Details how to use CUE and REVIEW buttons for audible fast forward and fast reverse playback.

Describes how to play tracks from discs in a random, unpredictable order.

Explains how to continuously repeat all tracks or a programmed sequence of tracks.

Guides on using the Automatic Programmable Music Selector to create custom playback sequences.

Instructions on how to clear all previously programmed track selections.

Advises on avoiding interference, shock, vibration, and foreign objects during CD operation.

Instructions for tuning into radio stations, including FM stereo and mono reception.

Guidance on adjusting the telescopic rod aerial for optimal FM, MW/LW, and SW reception.

Recommends tape types for playback/recording and warns against using certain tape formats.

Details how to prepare cassettes for loading and how to use tabs to prevent accidental erasing.

Step-by-step guide for playing cassettes in either TAPE 1 or TAPE 2 compartment.

Instructions for continuous playback of cassettes from TAPE 1 to TAPE 2.

Explains CD synchronised recording from the built-in CD player to TAPE 2.

Details how to record radio broadcasts from tuned stations to TAPE 2.

Describes the function of the beat cancel switch for improving radio recording quality.

Instructions for copying cassettes from TAPE 1 to TAPE 2 at normal or high speed.

Guides on connecting headphones, including impedance requirements and volume control.

Advises on cleaning the CD pickup, heads, capstans, and pinch rollers.

Provides instructions for cleaning the unit's exterior cabinet.

Lists general, tape recorder, CD player, and radio technical specifications.