EasyManua.ls Logo

Sharp XL-520W - User Manual

Sharp XL-520W
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
– 1 –
XL-520W/CP-520
CONTENTS
Page
SAFETY PRECAUTION FOR SERVICE MANUAL ........................................................................................................... 2
SPECIFICATIONS ............................................................................................................................................................. 2
NAMES OF PARTS ........................................................................................................................................................... 3
OPERATION MANUAL ...................................................................................................................................................... 5
DISASSEMBLY.................................................................................................................................................................. 7
REMOVING AND REINSTALLING THE MAIN PARTS..................................................................................................... 8
ADJUSTMENT ................................................................................................................................................................... 9
BLOCK DIAGRAM ........................................................................................................................................................... 16
SCHEMATIC DIAGRAM / WIRING SIDE OF P.W.BOARD............................................................................................. 20
VOLTAGE ........................................................................................................................................................................ 28
NOTES ON SCHEMATIC DIAGRAM .............................................................................................................................. 29
TYPE OF TRANSISTOR AND LED ................................................................................................................................. 29
WAVEFORMS OF CD CIRCUIT...................................................................................................................................... 30
TROUBLESHOOTING (CD SECTION) ........................................................................................................................... 31
FUNCTION TABLE OF IC................................................................................................................................................ 36
REPLACEMENT PARTS LIST/EXPLODED VIEW
XL-520W
CP-520
XL-520W and CP-520 constitute XL-520W.
SERVICE MANUAL
SHARP CORPORATION
No. S0780XL520W//
• In the interests of user-safety the set should be restored to its original
condition and only parts identical to those specified should be used.
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.

Questions and Answers

  • B
    Brandon BuchananAug 8, 2025
    Why is my Sharp Stereo System skipping tracks or not reading the TOC?
    • K
      kathryn52Aug 8, 2025
      Track skipping or failure to read the Table Of Contents on your Sharp Stereo System may be due to dust or foreign matter on the laser pickup lens. Ensure that the lens is clean before attempting any adjustments. Clean the lens to resolve this.
  • R
    Ricardo DeleonAug 12, 2025
    How to fix a Sharp Stereo System CD that is not working?
    • K
      Kimberly PerkinsAug 12, 2025
      If the CD function is not working on your Sharp Stereo System, it might be because the objective lens of the optical pickup is dirty. Clean the objective lens and then check if the playback operation is working.
  • T
    twatkinsAug 16, 2025
    What to do if the spindle motor CLV servo fails in my Sharp Stereo System?
    • S
      stephaniegonzalezAug 16, 2025
      If the spindle motor CLV servo fails in your Sharp Stereo System, it could be due to spindle motor failure or wire breakage. Check the periphery pins 55~64 to IC802. If these are OK, IC802 may be faulty.
  • Y
    ytaylorAug 20, 2025
    What to do if my Sharp Stereo System has a HF error?
    • M
      matthew38Aug 20, 2025
      If your Sharp Stereo System shows a HF error, check IC801 and the periphery of CNW802. If those are OK, the optical pickup may be faulty.
  • R
    Ryan Rios DVMAug 25, 2025
    What to do if the sled motor operation fails on my Sharp Stereo System?
    • A
      amitchellAug 26, 2025
      If the sled motor operation fails on your Sharp Stereo System, check the pattern between pin 27 of IC801 and pin 36 of IC802. Also, check the connection of peripheral parts of IC801. If these are OK, IC801 may be faulty.
  • H
    Haley MannAug 29, 2025
    What to do if my Sharp Stereo System has a laser lighting failure?
    • C
      Cameron BentleyAug 29, 2025
      If your Sharp Stereo System experiences a laser lighting failure, check the PWB pattern between IC701 and IC802 (BUCK/CCE/ BUS0~3). Also, check CNW802; if it's normal, the optical pickup is likely faulty.
  • M
    Mr. Frank Taylor DDSSep 2, 2025
    What to do if the focus servo sawtooth wave is not outputting on my Sharp Stereo System?
    • M
      Mikayla WrightSep 2, 2025
      If the focus servo sawtooth wave is not outputting on your Sharp Stereo System, check the pattern between pin 20 of IC801 and Q861.

Sharp XL-520W Specifications

General IconGeneral
BrandSharp
ModelXL-520W
CategoryMedia Player
LanguageEnglish

Related product manuals