High-Performance Projection
Elements
Low Fan Noise
The DLP™ high-speed colour wheel with non-
contact Fluid Dynamic Bearings together with
multiple ultra-quiet cooling fans reduce
unpleasant noise, enabling quiet operation at
30dB in Low Power mode.
2300 ANSI Lumen (XR-20X/20S)
2000 ANSI Lumen (XR-10X/10S)
High Brightness (Standard Mode)
Sharp’s advanced optoelectronics technology
maximizes light output, providing crystal clear
images in amazingly high brightness.
The New SHARP Notevision Provides Long-Lasting High-Quality Performance with Easy
Operation Simple Enough for Anyone to
Setup Guide for Interactive Operation
The XR-20/10 Series Setup Guide provides
intuitive OSD images to show the next step
interactively for setup including focus, zoom
and height adjustment.
Interactive Help Menu
The Help Menu displays any problems and assists
the user in solving problems with operation.
Setup guide is displayed after the projector is turned on.
Setup Guides
Sealed Optics
The optical mechanism is sealed in its
structure, preventing dust, dirt and smoke
from entering core parts of the optics to a
much greater degree than with LCD
projectors. The system also needs no filter
and less maintenance, resulting in lower cost
of ownership and longer use.
High-Quality Reliability
Long-Life High-Performance DLP™ Picture
With DLP™ technology minimally absorbing
high-output light, the projectors maintain
uniform colour reproduction capability for a
long period of time.
Also, DMD™ silicon chip formation with finely
structured mirrors provides stable performance
and delivers high-quality pictures for longer
periods. The DMD™ chip in the XR-20/10
series contributes to a long lifespan.
DLP™ projection
LCD projection
After 4100 hours After 4100 hours
* By RIT/Munsell Colour Science Laboratory Test
Slow speed air flow thanks to fans’ capacity
DMD Device
Light Ray
Sealed Optics
Cooling Vent
Heat Sink
In addition, because there is no burn-in or
remaining afterimage, the projectors are ideal
for still picture projection such as for guidance
board applications and projecting CAD images.
To Next Page
Loading...
Need help?
General
