Sharp Zaurus SL-C3000 - Page 116

my Zaurus SL-C3000 and SL-C3100 http://www.users.on.net/~hluc/myzaurus/
116 of 212 16/09/2007 12:23
To install Heretic, you need to install the following packages:
libsdl - [libsdl_1.2.5-slzaurus20050731_arm.ipk]
libsdl-mixer - [libsdl-mixer_1.2.5cvs-1_arm.ipk]
libsdl-net - [libsdl-net_1.2.5cvs-1_arm.ipk]
heretic-demo - [heretic-demo_1.2-3_arm.ipk]
heretic-engine - [heretic-engine_1.0.4-2_arm.ipk]
Once installed, leave the option "Display with magnified screen" ticked. It will automatically go full
screen and have the right landscape orientation.
Installing ltris and other lgames
This applies to the following games:
barrage - [barrage_1.0.2_arm.ipk]
lgeneral - [lgeneral_1.2beta-2_arm.ipk]
lmarbles - [lmarbles_1.0.7-2_arm.ipk]
ltris - [ltris_1.0.10-2_arm.ipk]
If you cannot save your results or start the game, do the following:
# su
# chown -R zaurus /home/zaurus/.lgames
Installing Supertux
Once you have installed supertux you need to change /home/QtPalmtop/bin/supertux.sh (this
assumes you already have sudo configured to allow you to mount and unmount, see sudo section):
#!/bin/sh -e
BASE=`grep "/QtPalmtop/$" /usr/lib/ipkg/info/supertux.list | tail -n 1`
#sudo mount ${BASE}share/supertux.cramfs ${BASE}share/supertux -o ro,loop
sudo mount ${BASE}share/supertux.cramfs ${BASE}data -o ro,loop
supertux
#sudo umount ${BASE}share/supertux
sudo umount ${BASE}data
Installing FreeCiv
You need the following packages/files:
stdsounds2.tar.gz
freeciv_zaurus_0_0_5_bin.tar.bz2
To install freeciv do the following:
# su
# mkdir -p /home/QtPalmtop/share/freeciv
# bzip2 -dc freeciv_zaurus_0_0_5_bin.tar.bz2 | tar xvf - -C /home/QtPalmtop/share/freeciv
# mv /home/QtPalmtop/share/freeciv/civclient.png /home/QtPalmtop/pics
# zcat stdsounds3.tar.gz | tar xvf - -C /home/QtPalmtop/share/freeciv
# ln -s /home/QtPalmtop/share/freeciv/data/stdsounds.soundspec
/home/QtPalmtop/share/freeciv/data/stdsounds.spec