To Next PageTo Next Page
Need help?Do you have a question about the Sharp PC-1350 and is the answer not in the manual?
General| Model | PC-1350 |
|---|---|
| Category | PDA |
| Keyboard | Alphanumeric |
| Programming Language | Basic |
| Release Year | 1983 |
| Display | LCD |
| Power Supply | 4×AA batteries |
Describes the physical arrangement of keys on the PC-1350.
Identifies the specific model number of the device.
Details capacity, method, and precision of calculations.
Indicates the primary programming language supported.
Identifies the CPU and specifies the size of the built-in ROM.
Details the available memory for programs and data.
Outlines the different types and depths of stack registers.
Lists fundamental mathematical and scientific functions.
Describes text and program editing capabilities.
Explains serial communication parameters and interface signals.
Details how data is preserved during power loss.
Specifies display characteristics, including text and graphic modes.
Covers auto-power-off, operating temp, power supply, and battery life.
Details physical dimensions, weight, accessories, and options.
Provides detailed battery life conditions and retention times.
Lists power consumption values for different operating states.
Explains how to determine when batteries need replacement.
Provides a note on replacing RAM card batteries.
Illustrates the memory address map for ROM and RAM cards.
Shows program/data area capacities with different RAM cards.
Explains methods for retaining data on RAM cards.
Describes how to manage RAM card setups using MEM "C" command.
Warns about data loss when using the RUN command.
Explains how PC-1350 programs interact with RAM cards.
Details built-in test programs for CPU ROM and external ROM.
Provides detailed descriptions of the SC61860A LSI signals.
Describes tests for display output and key input functionality.
Table mapping display codes to corresponding keys.
Details tests for serial I/O functionality using test programs.
Illustrates timing diagrams for the SC43537 display LSI.
Displays waveforms for counter and segment outputs.
Describes the function of the SC60220 Gate Alley LSI.
Details types and specifications of RAM cards.
Provides instructions for safely removing RAM card boards.
Outlines the procedure for testing RAM card power consumption.
Shows the circuit diagram for the PC-1350 CPU.
Illustrates the circuit diagram for the PC-1350 display.
Shows the circuit diagram for the PC-1350 memory circuit.
Depicts the circuit diagram for key and LCD matrix components.
Explains the function of jumper circuits for RAM card data protection.
Explains the function of jumper circuits for RAM card data protection.
Provides circuit and parts layout for the CE-201M.
Provides circuit and parts layout for the CE-202M.
Provides circuit and parts layout for the CE-202M PCOS type.
Describes the pinout of the 15-pin connector for PC-1350 interface.
Lists part numbers and associated signals for interface.
Lists external parts of the PC-1350 with part codes and descriptions.
Lists accessories and other miscellaneous parts.
Lists components and specifications of the main PWB.
Lists components and specifications of the memory PWB.
Lists part codes for CE201M/CE202M options.
Lists part codes for the CE516L option.
Provides supplementary information and correction procedures.
