Do you have a question about the Sharp PC-G850VS and is the answer not in the manual?
Details the physical pin assignments and logical signal directions for the 11-pin interface.
Explains the RS-232 standard, DTE/DCE terms, and connector types used in SIO mode.
Compares logic and voltage levels of RS-232, UART-TTL, and PC-G850V(S) for SIO mode.
Describes RS-232 level converter cables for PC data transfer via SIO mode.
Details connecting the PC-G850V(S) using USB-UART adapters in SIO mode.
Guides on connecting RS-232 printers, including wiring, configuration, and commands.
Explains synchronous serial data transfer, contrasting it with asynchronous SIO mode.
Describes the default protocol for printers and cassette interfaces using SSIO.
Details the LPRT protocol and mini-I/O port for custom communication protocols.
Covers the protocol for saving/loading data to tape recorders using PWM via CE-126P.
Explains the generic PWM protocol for direct PC-G850V(S) interconnections.
Details the 8-bit parallel port for controlling external hardware and microcontroller development.
Describes transferring assembled PIC programs to PIC microcontrollers using the ICSP protocol.