my Zaurus SL-C3000 and SL-C3100 http://www.users.on.net/~hluc/myzaurus/
209 of 212 16/09/2007 12:23
image of a more heavily customised version of the ripped initrd.bin file with many more
pre-installed applications.
Note that the file structure between hdimage-base and hdimage-full differs slightly to the structure
in hdimage-custom. Both hdimage-base and hdimage-full have all the files and directory structures
located under /hdd1 wheras hdimage-custom contains no parent /hdd1 directory.
pdaXii13 build
pdaXii13-build.tgz is a complete build image for creating the pdaXii13 flash/install files as well as
the initrd.bin image. This build image can be used to build pdaXii13 from the Z directly. It works if
you have Sharp/Cacko/pdaXrom installed on your Zaurus.
pdaXii13-custom.tgz contains all the customisation files that were used to customise the initrd
image from beta3 to create hdimage-base.tgz
In theory (this has not been tested), one could use pdaXrom builder to build a custom image for the
C3100, but instead of generating an initrd.bin file, you could tar up the generated image instead
and use the files from the pdaXii13-custom.tgz tarball to customise the image for the C3000.
The shell script install-fixes-beta3.sh contained in pdaXii13-custom.tgz will apply all the basic
customisations and could also be used to update a C1000/C3100/C3200 beta3 install with fixes
similar to pdaXii13 base. A readme file is included in the tarball which describes each file in the
bundle.
The build files for pdaXii13 can all be found at tyrannozaurus pdaXii13 build section.
OpenZaurus customisation:
<--include custom-oz.html custom -->
Angstrom customisation:
<--include angstrom.html custom -->
Debian customisation:
<--include debian.html custom -->
Resources:
http://ezaurus.com/lineup/sl/index.html - Zaurus product page
To Next Page
Loading...
