my Zaurus SL-C3000 and SL-C3100 http://www.users.on.net/~hluc/myzaurus/
27 of 212 16/09/2007 12:23
The following is my mapping:
Dictionary -- Dictionary
Calendar -- Qkonsole
Address -- MusicPlayer
Mail -- NetFront
Home -- Home
Menu -- Menu
And here are some useful keyboard shortcuts for Qkonsole:
Fn+s will switch between terminals/consoles
Fn+n will create a new terminal/console
Fn+5 will toggle fullscreen terminal/console
Shift+Up will scroll up
Shift+Down will scroll down
If you get ~0, ~1, ~2, ~3 when you hit the function keys at the bottom of your keyboard while in
qkonsole, copy my modified linux.keytab and vt100.keytab to /opt/QtPalmtop/etc/keytabs and it
won't happen anymore.
# su
# cd /opt/QtPalmtop/etc/keytabs
# cp /home/zaurus/Documents/custom/linux.keytab .
# cp /home/zaurus/Documents/custom/vt100.keytab .
Here are some useful keyboard shortcuts for NetFront:
Fn+h home
Fn+r refresh
Fn+s save
Fn+u view previous link
Fn+i view next link
Fn+d add bookmark
Fn+f find
Fn+k toggle search bar
Fn+m new tab
Fn+b close tab
The esc key in vi is mapped to the cancel key on the Zaurus.
The function keys F1 - F10 in midnight commander are mapped to Fn + 1 to 10 respectively.
X/Qt (and also Debian PocketWorkstation which uses X/Qt) has its own keymapping. Get
xmodmaprc-c3000 and place it under /home/zaurus and/or /home/root as .xmodmaprc if your keys
misbehave.
.xmodmaprc does the following remapping so the keys are mapped similar to keyhelper:
Swapped / and , key
Fn + q = `
Ctrl + q = '
Fn + o = {
Fn + p = }
The Menu key will activate the X/Qt control.
To Next Page
Loading...
