- 4 -
CAMERA SPECIFICATIONS
Power Supply DC 5V2A
Power Consumption 2W (Max.)
Standby Current <500uA
Battery Life 4-6 months
Battery Capacity 5200mAh
Image Quality 2 megapixel/1080P
Viewing Angle 130°
Night Vision Range 8m (Max)
Wireless Connection 2.4 GHz Wi-Fi IEEE 802.11 b/g/n
Anti-Flicker 50HZ 60HZ
Operating Temperature -5F° to 120°F
Operating Humidity 10% ~ 95% non-condensing
LED INDICATOR LIGHT STATUS
Red light on continuously Booting up
Red light fast blinking Waiting for network setting
Green light fast blinking Network connecting
Green light on continuously Network connected
Red light slow blinking Abnormal status
Yellow light on continuously Firmware upgrading
White light on continuously Battery charging
White light off Battery fully charged
NOTES BEFORE INSTALLATION
1. Keep this device out of reach of children and pets.
2. Make sure the camera has been fully charged (DC 5V/2A). We recommend charging the
camera indoors via type C and correct adapter at first. Once it is set up, you can plug the type
C charging cable directly into the solar panel for continuous hassle-free charging.
3. Working temperature -5F° to 120°F.
4. Working relative humidity 10% ~ 95%.
5. Do not expose the camera lens to direct sunlight.
6. The camera is rated IP65 waterproof for use in the rain or snow. However, do please not
submerge the camera in water.
PLEASE NOTE:
• This device will not connect to a 5G (5GHz) Wi-Fi frequency. You must have a 2.4GHz router or
a dual-band (2.4GHz + 5G) router and enable both bands. Consult your router instructions for
details.
• Strong lights may interfere with scanning the QR Code.
• Avoid placing this device behind furniture or near a microwave oven.
• Keep this device within your Wi-Fi network range.
To Next Page
Loading...