- 7 -
FOOD PLATE INSTALLATION
(
2 OPTIONS
)
OPTION 1:
Install the nectar plate onto the feeder from the top and fix. It can be filled with a table sugar and
water mixture or hummingbird nectar. The plate can easily be removed for washing.
OPTION 2:
Install the seed plate onto the feeder from the top and fix. It can be filled with dry food for other
types of birds. The plate can easily be removed for washing.
HOW TO CHARGE
1. Remove the battery from the battery slot on the side of the camera.
2. Insert the included type-C charging cable into the battery to charge. While charging the red light
will remain on and will turn green once fully charged.
3. After fully charging the battery, insert the battery pack back into the battery slot on the side of the
camera and close the cover.
To Next Page
Loading...