Rubber-tipped Button
1. To switch on Momentary Light mode, gently press the rubber-
tipped button. Hold down as long as light is required.
2. To switch on Constant Light mode, firmly press the rubber-tipped
button. To switch off Constant Light mode, press the button again.
Battery Precautions
• Use only the size and type of batteries specified.
• When installing batteries, observe proper +/- polarities.
• Do not mix old and new batteries.
• If the unit is not going to be used for a long period of time,
remove batteries to prevent damage or injury due to possible
battery leakage.
• If light becomes dim, replace the batteries.
LED Flashlight Operation
End Cap
To Next Page
Loading...
