Sharper Image SI785 - Power Requirements; Battery Compartment and Back-up Batteries

Power Requirements
Activate the two CR2032
back-up batteries by removing
the paper tab from the battery
compartment. Replacement of
these batteries is required every
2-3 years.
Install 6 AA alkaline batteries.
Use only fresh/new batteries in
this product. Replace all 6 used
batteries when the low battery
icon fl ashes.
To eliminate the need for AA
batteries, use the AC adapter
designed for this product.
NOTE: Using the AC adapter
will allow the display light
to remain on when LIGHT is
pushed.
ADAPTER
JACK
BATTERY COMPARTMENT
(Bottom of unit)
BACK-UP BATTERIES
(Inside battery compartment)
9K/10K SWITCH
(See radio section of manual.)