Shearwater SWIFT - User Manual

Lists key capabilities and physical attributes of the Shearwater Swift transmitter.

Instructions on physically attaching the transmitter to a regulator's HP port.

Emphasizes the critical need for a redundant analog submersible pressure gauge.

Details on turning on/off, LED status, pairing, and dive computer configuration.

Crucial steps for purging air and checking tank valve status before diving.

Information on using multiple transmitters and compatibility with other dive computers.

Step-by-step guide to removing the cover, exchanging the battery, and reassembling.

Verifying correct operation and understanding LED signals after battery change.

Addresses issues with premature battery depletion and potential causes.

Explains the voltage thresholds for low and critical battery warnings.

Solutions for intermittent signal loss, like repositioning the transmitter.

Identifies sources of RF interference and how to mitigate them.

Recommendations for storing the Swift transmitter to prevent damage.

Instructions on how to clean the transmitter and avoid damage.