AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 9
Before First Use
1. Remove all packaging materials.
2. Remove any stickers or labels from the appliance. (Except the rating label! And Do
NOT COVER warning)
3. Wipe the outside of the appliance with a moist cloth and dry with a towel.
INSTRUCTIONS
NOTE: It is normal when the heaters are turned on for the first time or when they are
turned on after having not been used for a long period of time the heaters may emit
some smells and fumes. This will disappear when the heater has been operating for a
short while.
Location
This heater is intended for use only on the floor.
The appliance should be placed with a minimum distance of 120 cm from
flammable objects, walls or structures! The appliance openings must not be
obstructed in any way!
Keep all combustible materials such as furniture, pillows, bedding, paper, clothes
and curtains at least 3 feet away from heater.
Do not place anything on top of Heater.
Do not use in wet or moist locations; for example, bathrooms or laundry areas, or
in areas where paint or other flammable or volatile liquids are used or stored.
Using Your Heater
REMEMBER: Portable electric heaters are designed for space heating or as a
supplementary heat source. They are not intended to be a main source of heat.
1. Before using the heater, make sure that it is on a flat and stable surface. Damage
may occur if it is placed on an incline or decline.
2. Set all the controls to OFF position and insert the plug into a socket-outlet that is
compatible with the rating label on the product. Be sure that plug fits firmly.
3. Press the ON/OFF button to the ON position.
4. Press the 1000W buttons to the desired heat (Buttons B&C both pressed on) this
is full heating power 2000W.
5. Press the FAN button down to the on position. The indicator light will illuminate
indicating the elements are heating and hot air will start to blow from the front of
the heater.
NOTE: The FAN button must be on for the heater to operate.
6. When your room reaches the desired temperature, you can reduce the heat
output by pressing and releasing the 1000W button “C” to the off position. This
To Next Page
Loading...
General