3. The LED will start flashing. The charging level is indicated by the LED
battery level indicator. (Please refer to the following table for
charging status)
4. When charging is completed, the LED indicator will stop flashing.
5. Disconnect the charger from the outlet and remove the charging
cable from the charger and the jump starter.
LED Battery Level
Indicator
LED Status
First light flashing
Battery Capacity
0% to 25%
First light solid, and the second
light flashing
25% to 50%
First two lights solid, and the
third light flashing
50% to 75%
First three lights solid, and the
forth light flashing
75% to 100%
All four lights are solid 100% fully charged
4
To Next Page
Loading...
